Posted by Haas on September 04, 2010 at 18:22:27 from (75.216.35.189):
In Reply to: Hauling Farmall B posted by sflem849 on September 03, 2010 at 20:35:30:
Not real familiar with the B, but I think the front bolster has tapped holes (like the C) for mounting cultivators. Go to the fastener store and get a couple of heavy duty (Not the bent loop kind you find at the hardware store or Lowe"s) eye bolts of the proper size that are certified for lifting. These eye bolts are made for lifting heavy equipment such as gear boxes and electric motors that have tapped lift holes. Screw the eye bolts in the front bolster and hook your straps or chains in them, tighten up and you are good to go. I"m not sure if you will need 5/8 or 3/4 eye bolts for the B, but either is plenty strong enough. The bolts I got were made in USA and certifed for lifting, so they are not cheap. I recall paying $8 each or so a few years back.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.