Farmall & IHC Tractors Discussion Board |
International 444 Oil Pressure
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by DHunter on July 16, 2000 at 09:10:43 from (205.188.199.140):
My International 444 gas has good oil pressure when cold, 40-50 psi, but after it it heats up the oil pressure drops to 10-15 psi when revved up to working rpm's. When it's idled and hot the pressure drops to almost nothing. The 'big boys' tell me it's either the oil pump or rod bearings. I'm thinking of dropping the pan to take a look at the oil pump. Is there a spring in it that can be shimmed or any other adjustments that can be made, or will it have to be replaced. Think while I have it down I'll just go ahead and replace the bearings. Should I order replacements now or wait and micrometer the crank races before ordering? The enging isn't knocking or making any other weird noises.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|