Posted by Dean Olson on April 07, 2011 at 21:21:09 from (76.31.42.124):
In Reply to: Part(s) Washers posted by Al L. in Wisc. on April 07, 2011 at 09:32:52:
I use a 55 gallon drum with removable sealed lid filled with about 30 gallons of diesel to soak and pre-clean. I have an 20 qt aluminum basket out of an old turkey fryer that I use for the small parts. I have about $150 in that as the diesel was the most expensive component. That was the cheap and easy way to go initially. I have since acquired a professional grade parts washer that sits on top of a 30 gallon drum it has a pump with a brush that flows the cleaner through it. I pd $100 for it from a guy who had it listed on craigslist. It came with mineral spirits. That was a deal.
I don't ever seem to be able to finish a project in one session so I disassemble and put all the parts in the diesel. In the mean time I chase down and order parts,gaskets, seals etc then when I get a chance I go from the diesel to the parts washer and then go back together. Yes they are a must have and definitely worth the investment.
Mineral spirits or diesel are the way to go. I tried the water based cleaner and was not happy with it.
If you buy a new washer be sure it's rated for the flammable cleaners. From what I understand the water based parts washers aren't spark proofed
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.