Posted by FarmallJon on May 10, 2011 at 17:34:00 from (72.224.243.66):
Hello all, I'm finishing up my restoration of my 1949 H. I bought a reproduction front "nose emblem" from ebay. It is made of aluminum, and looks pretty nice. The issue I'm having is that the emblem has straight sides....it is bent in the center, and each side is straight. The nose of the tractor is rounded, not straight. The emblem fits well right in the center, but since both sides of the emblem are straight and not rounded to follow the contour of the nose, the ends of the emblem are about 3/4" from touching the nose. Somehow, I have to bend some shape into each end of the emblem so it will lay back against the nose correctly. The problem is that the emblem is made from an aluminum "channel" and is quite resistant to being bent or formed. I'm afraid I will kink the top and bottom surfaces if I try to bend or form it backwards to the nose of the tractor. Anyone have any suggestions, or run into this before? Thanks in advance, Jon H.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.