Farmall & IHC Tractors Discussion Board |
Re: Re: Re: 706 Tran Fluid
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by SDman on August 10, 2000 at 21:29:00 from (63.83.208.134):
In Reply to: Re: Re: 706 Tran Fluid posted by Z-bar on August 09, 2000 at 03:32:21:
Z-Bar, that is correct if the rear end has never been worked on. Originally, the 06s & the earlier 56s had a soft plug beside the inner bull-gear bearing that sealed the axle housing separate from the rear-end housing. You filled the axle housing to the level of the check/fill plug on the side of the axle housing separately from the trans. level dipstick. Now, if you ever worked on the rearend so that you had access to the plugs, you were supposed to knock those plugs out so that the axle housings & transmission case were one big, common reservoir that was just filled at the dipstick. More than likely, your rear end on your 706 has never been worked on in that area. This is the way the 66s & 86 Series were set up from the factory.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|