Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Removing all the water ballist from my wheels
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Best leave it alone on August 12, 2000 at 20:39:00 from (207.177.47.173):
In Reply to: Re: Re: Re: Removing all the water ballist from my wheels posted by Burrhead on August 12, 2000 at 15:50:07:
Kevin & Burrhead- My gut tells me Kevin is best off to leave sleeping dogs lie. All the messing around no doubt spilled/leaked some of the highly corrosive calcium chloride solution around the valve stem hole in the rim. If Kevin want's to do it right, then pull the tires and tubes off the rims. Give the rims an agressive hot soapy water wash and hot water rinse. Sand blast the corroded spots on the rims and give 'em a good coat of paint. With the valve cores out do a careful fold and squeeze the inner tubes, valve stem at lowest point in the activity, to get as much of the solution out as possible. Next, inflate the tubes and give 'em a good hot soapy water wash and rinse, then hang up to air dry. After that, more hot soapy water and scrub, scrub, scrub the inside of the tires. Again, lots of hot water rinse and allow to fully air dry after wiping out the rinse water you couldn't dump out. Burrhead, keep in mind that up here the tires are filled with a strong CaCl solution. It prevents freeze up in cold weather and adds a lot of weight to the solution. My gut tells me that this late in life it would be wise to not even mess with it. Next time he has a flat, or some tire problems, he'll be presented with a wonderful opportunity. He will be able to install brand new rims, brand new tubes and brand new tires, and at the same time forbid the presence of CaCl anyplace near the work area. That set up will probabably last him another 25 years easy. It seems like once CaCl gets on metal there ain't no stopping the corrosion. You can slow it down, but the stuff seems to just keep eating away at the metal. You towns folks can get some good out of this info, if you keep in mind that "road salt" used during winter, often contains at least some CaCl. No grins on this, IHank
Follow Ups:
Home
| Forums
Today's Featured Article -
New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|