Posted by bc on September 05, 2011 at 22:10:53 from (67.66.111.186):
Hi, Since it wouldn't start, I pulled the IH carb on my 2606 to clean it. Found a build up of rust inside the carb body with a collection around the main jet. I have it soaking in Berryman's now.
I'm just wondering how to keep the inside from rusting. It did it last summer as well and that was after I had acidized the tank again that spring. Having the usual rust in tank problems, I have acidized it a couple times. Last spring after the HCL acid bath, I added a phospheric acid and water mix to coat the tank. I didn't get all the phospheric acid drained out and some got in the carb and made it rust for the first time which I cleaned last summer.
These carbs are cast steel of some kind and they shouldn't normally rust, should they? Anyway is there anything I can coat it with before putting it back together again? Thanks.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.