Posted by JTBARTLETT on September 30, 2011 at 15:49:42 from (71.169.162.112):
I have been working on a stage 2 super m adding a loader and Saginaw 3pt hitch. I have a 2 part problem that I cannot figure out. When engaging the hydraulic valve (resevoir under the tank) the engine seems to bog down much more than I think it should. The pump gets hot - again more than I think is right. It is pumping fluid because the loader, 4 cylinders and 3pt, 2 cylinders all extend and retract. That" problem #1. When I retract the loader arms I get hydraulic fluid blowing out of the fill cap along with a generous amount of air. I have been cycling the cylinders in and out hoping I was getting the air out of the lines however it has not stopped. I refill the resevoir as needed. Do I just keep doing this? All of my connections are tight and I"m not losing fluid anywhere else. Is it normal to have that much pressure through the return into the resevoir? I have 3 Gresen valves set up. They all seem to be OK but at this point anything could be wrong. Any ideas what my steps should be to track down these problems? Thanks.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.