I have had good and bad experiences with sandblasting. As others said, I would never sandblast an assembled tractor. I only sandblast parts and not all parts as I never sandblast engine or hydraulic parts. I have my engines hot dipped and I use a wire wheel for finishing/cleaning hydraulic parts. Once I sandblasted the main transmission housing (didn't completely disassemble the back of the tractor) after I had all the rest of the tractor rebuilt. I thought I had all the holes covered, but since there is not a gasket between the brake housings and the transmission housing, sand got in the brakes. I had to take them back apart and clean. Others also have said never sandblast sheetmetal. I have had good success if you are careful. You have to keep the blast nozzle at a distance and use the finest grit sand you can purchase. I remember the biggest disaster I had sandblasting sheetmetal was just after I bought my sandblaster. My son brought over the covers for his baseboard heating units that had many layers of paint on them. By the time we had all the paint and rust off they were virtually unusable as they were warped so bad. Roger
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
