Farmall & IHC Tractors Discussion Board |
Re: 04-harold
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Harold H on August 28, 2000 at 18:18:20 from (207.244.55.173):
In Reply to: 04-harold posted by jakee on August 27, 2000 at 16:06:46:
Jakee, The serial number prefix on the O-4 is OBH while the serial number prefix on the OS-4 is OBHS, therefore if the serial number plate is intact, you cannot pass one off as the other. The outside part of the full coverage fenders is removable in order to change the tires, but I am not sure wether or not the fenders were designed with the necessary strength to operate daily with the outside removed. The floorboards are different due to the different attachments to the fenders. I am not sure about the rear rims. The standard tire sizes were 11-26 4 ply rear and 5.50-16 4 ply front. Optional were 12-26 and 13-26 6 ply rear and 5.50-16 6 ply and 6.00-16 4 or 6 ply front. Hope this information helps. Harold H
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|