Farmall & IHC Tractors Discussion Board |
Re: Water Pump For C
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brian Schmidt on September 11, 2000 at 20:39:49 from (207.179.196.108):
In Reply to: Water Pump For C posted by Clint Proeschel on September 10, 2000 at 16:22:32:
Yes you can just bolt it on. However without changing the head gasket it will not do much good. The Super Cs use a head gasket with larger ports in the water jackets. You will not be flowing much water throug without changing the gasket. You also need to find the rear part of the pump. This part is has the water inlet in it. You will also need the upper neck/fan drive casting. When you remove the old neck off the bottom, you will loose your port for the temp gauge. The Super C upper casting has the temp port in it. It also has the thermostat. On my C, I just finished plowing for about 4 hours a couple weeks ago in 95 degree 90% humidity and mine never heated up at all. I was pulling a two bottom in second and first gear some times. Working the tractor very hard!! Run some flush through the system for a while and then have the rad boiled out. This is much cheaper than buying all the stuff to put a water pump on it. You really don't need it anyway. At some point in the future the pump will start leaking then you have another problem to deal with. Keep things as simple as possible. That is what this hobby is all about. Otherwise we would all probably would have Kabotas.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|