Farmall & IHC Tractors Discussion Board |
Re: Ok, newbie question of the year probably.....
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on October 30, 2000 at 08:16:49 from (207.254.52.159):
In Reply to: Ok, newbie question of the year probably..... posted by Jim on October 29, 2000 at 15:56:24:
Hi Jim, You can make your own gauge really easy. Use a piece of sheet metal and put a pin on the flat, so it swings loose when the plate is moved, mark it at 90, 80, 70, etc, degrees. Put your tractor on level ground and install on tractor. Take a couple chains from the tractor to a dead stake from the side you'll lift from. Jack up tractor on one side adjusting the chains as you go. You'll will find center of gravitiy and the chains keep it from flipping over the tractor. Note angle on gauge and divide this by half. That would be your maximum safe angle the tractor can work without tipping over providing you don't hit a bump in the surface. T_Bone
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|