Farmall & IHC Tractors Discussion Board |
Re: Carb Rebuilt Kit for Farmall M
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bama Binder on November 13, 2000 at 05:49:26 from (206.5.110.15):
In Reply to: Carb Rebuilt Kit for Farmall M posted by Jim H. on November 13, 2000 at 04:58:06:
The part number is on a brass disk on the carb (I think it is on the top half). I think there is only 1 kit for the M, but I could be wrong. I have used the cheapo kits from TISCO on a Cub and Super H. They seem to work fine, but you just get the gaskets, the throttle shaft, needle valve and a few other parts. I probably wouldn't have fooled with it, but both tractors had set up for a few years and while the carbs were basically in good shape, I needed to clean them. So I just used the basic kit. Had the screws, springs, and other parts been in bad shape, I probably would have used the IH kit. A guy looked at the carb last Saturday and thought I had put a new carb on it. He was surprised that I had just rebuilt it. I think there are kits from IH that are very complete and include most if not all of the gaskets, screws, springs, jets, etc. I have heard good things about those kits, but they are a bit spendy (like $85-90). So you pays your money and makes your choices...BB
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|