Farmall & IHC Tractors Discussion Board |
Re: 340 International TA?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by dick on November 30, 2000 at 12:30:01 from (199.239.12.58):
In Reply to: 340 International TA? posted by Dan on November 30, 2000 at 11:01:10:
Well, anything is possible given enough time, effort, and money. Probably most folks will tell you that adding a TA to this tractor will take about as much of each as the tractor is worth. First you'd have to buy the TA and its control lever. You can probably find the lever at a salvage yard, and TAs are a fairly standard item from parts suppliers. Then you'd have to split the tractor (I think to put in a TA you'd end up pulling the clutch housing out completely, i.e. splitting the tractor in two places). A lot of work and money. On your exhaust, the 300 Utility was offered with either the underslung or overhead exhaust from the factory. I'd assume this was true for the 340 also. On the 300 these required different sheet metal, as well as exhaust parts. If you really want details on this, get a parts book for the 340 from Binder Books - it shows just about every nut, bolt and option, and is a very good investment if you're planning to do any work on the tractor yourself.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|