Farmall & IHC Tractors Discussion Board |
Re: Re: Cracked Block Farmall A
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Al_Wa. on December 18, 2000 at 18:27:07 from (63.30.16.253):
In Reply to: Re: Cracked Block Farmall A posted by gene b on December 18, 2000 at 03:37:15:
Gene, Thanks for the response. "are you talking about the steering side in that area how high up did the crack go might have an internal crack also" Yes the crack and the braze are on the front right corner. The corner of the block including the two block mounting holes were broken loose and brazed back to the block. The crack is visible from under the block at the oil pan mounting face. It does not extend up past the original braze. "some of the new ceramic type of stuff you would have to rig up some sort of pump to circulate the mixture would be easy connect from the drain plug to the radiator this is some excellent stuff hear good reports about it" I'm not sure what your talking about here, is these like the GUNK stop leak stuff you put in a radiator only better? I know the right way to fix this is tear the whole thing down dig out the old braze, heat the block up and braze it all again. I'm getting lazy in my old age and trying to get off light. Thanks for your thoughts.
Follow Ups:
Home
| Forums
Today's Featured Article -
Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|