Posted by caterpillar guy on March 24, 2014 at 04:03:16 from (75.128.159.22):
In Reply to: Repair costs posted by BigTone on March 23, 2014 at 18:14:31:
Unless the TA is bad I would just leave it.That is a lot of work. 2 splits, and the oil leak on the clutch is probably the rear main seal if it is black oil if not then the front main on trans. I would look at the ring and pinion gears if I got that far as they are more likely to go bad by this time if it has run enough to have the seals leaking. After all it is 35years old about. If you decide to do the rear end gears with all bearings that is 5,000.00 alone with no labor. Dad did his 1466 a couple of years ago. We put new ring and pinion in with all new bearings in the range trans with a gear or 2 axle bearings. From the clutch back it has been more or less restored just no paint.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.