Farmall & IHC Tractors Discussion Board |
Re: SMTA Wiring
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Phil Auten (TX) on January 10, 2001 at 09:44:37 from (64.217.53.44):
In Reply to: SMTA Wiring posted by Randy S. on January 10, 2001 at 09:07:58:
Randy, If your tractor is still using a generator look in Research & Info on the left side of the screen. Then find Article Archives in that section and click on it. There are two types of generators used on tractors. You would most likely have a Third Brush type so click on the Third Brush Generators article. There's a schematic at the bottom of the article. If it turns out you have a two brush generator, use the Two-Brush Generators article instead. If you have an alternator, find out if it's internally regulated or not. You may not need a regulator at all. If you do need a regulator, I would consider replacing the alternator with a GM 10Si alternator that is internally regulated. It will work forever without any maintenance or problems. In that case, use the article A Step-by-step 12-Volt Conversion by Bob M. It's excellent and there's a schematic at the bottom of it too. My 2¢, Phil
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|