Posted by dhermesc on May 16, 2011 at 06:17:53 from (24.248.193.103):
In Reply to: Motor Oil posted by 37chief on May 14, 2011 at 23:00:26:
30W will actually be thinner (have less viscosity) at operating temp then 15W40. But monograde motor oil is actually more stable and less prone to break down at high temperature and during prolonged use when running an engine hard for 8-20 hours at a time.
Thicker (higher viscosity) is not always better. On a fairly worn engine where its beyond factory tolerances using 40 weight instead of factory recommended 30 weight won't be an issue at all and probably even be better. However if the engine is still "tight" and within factory specs I would use the thinnest oil the factory recomends to ensure everything gets lubed.
Oil coats the internal moving parts and prevents metal on metal contact. The manufacturer recommends an oil that is thin enough to coat the metal and prevent metal on metal contract but thick enough to not break down under heat. With oil too thick (high of viscosity) and it literally can't coat the moving the parts until enough wear (excessive tolerance) has occured to give the oil enough room to coat the parts.
If you engine is good and tight I'd use straight 30 weight in the summer and 10W30 in the winter. If its "loose" burning a bit oil I'd use 15W40 year round.
If you have a brand new car engine that recommends 5W20 but put 15W40 in it because that's what all your other engines use you'll cause as much wear in one oil change as 100K of driving. If you go back to 5W20 on the next oil change it wouldn't surprise me it it started buring oil.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
