To give you an example of the cost of a water pipeline, here is some current information on a plan to pipe water from the Glen Canyon Dam on the Colorado River, which forms Lake Powell, to a populated area in southern UT. From early planning until implementation it is projected to take 20 years. As you can guess, many people with their heads on right are fighting this plan.
Short Description: The project consists of approximately 130 miles of buried 66-inch pipe from Lake Powell to Sand Hollow Reservoir near St. George, plus 38 miles of 30-inch pipe from Quail Creek Reservoir to Cedar City.
The Utah Division of Water Resources' current cost estimate (June 2008) for the entire project is $1.064 billion. This includes construction, materials, engineering, land and right-of-way acquisition and agency fees.
It also includes pumping facilities drilled into the sandstone rock near Glen Canyon Dam with booster pumping stations along the pipeline alignment to provide the approximately 2,500 foot lift needed to carry the water over the high point (which will probably mean drilling through the Cockscomb) in the pipeline.
Hydroelectric generation facilities will be included to utilize the roughly 3,000 foot drop between the high point and the end of the pipeline. The hydro-power projects include Little Creek Development for 18 megawatts; the Hurricane Cliffs Pumped Storage Development that would include two reservoirs and produce 415 megawatts; and the Sand Hollow Development, which would produce 10 megawatts.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.