Posted by ollie770 on August 30, 2011 at 19:37:36 from (166.225.63.9):
I have a 20 x 40 shop building for my tractors. It currently has the original roof which is 2x6 rafters, some 1" x 12" boards for sheeting and then old cedar shakes. I am planning to install ribbed steel panels over the top. I was going to line the roof every 3 -4" with 2x4s for nailer boards for the tin. I was planning to nail/screw the 2x4s to the roof rafters and then screw the tin in the flats into the 2x4s. I am looking for some input on the ridge cap and the eaves. Should I use just standard steel ridge cap with the form enclosure strips for the gaps between the ribs? Or is the there a better option? Right now the eaves are just the ends of the rafters with no fascia board. Do I need a fascia board and some metal trim installed there or not? How far should I hang the tin sheets past the existing cedar shingles? Planning to do this weekend and want to do it right and not spend a ton of money (I know those two don"t go together!) Any advice, tips is greatly appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.