Posted by John T on December 16, 2011 at 15:38:38 from (173.243.181.15):
In Reply to: Oh come on now ! posted by LJD on December 16, 2011 at 10:50:02:
GREAT CHAT, THANKS, I hope were helping the others with all this. Not a problem my friend, I figured you knew that, NOTICE I ADDRESSED MY COMMENT TO 2710 so he wouldnt think just "any" motor would suffice, because it simply, as Im sure you understand, will NOT.
My statement if modeled after yours to 2710 would read something more like:
In theory, you COULD use "almost" any size motor IF geared low enough SO LONG AS AND PROVIDED THAT it has enough HP to overcome the heat and friction loses of the winch just to turn it PLUSSSSSSSSSSSS enough additional HP to pull the actual load........
If you had a 1/20 HP hobby motor and I dont care if you tried to gear it down 100 to 1 or 1000 to 1, it may or may not even turn the winch let alone pull any load. IT TAKES X HP TO TURN ALL THOSE HEAVY GEARS. The gear reduction mechanism uses up some of the motors HP. Its true you may have more TORQUE by gearing down, but at the expense of RPM and HP is a function of Torque X RPM, you gain on one but loose on the other PLUS you get less out then you put in because the friction of the gears converts some of the input energy into wasted heat......
As an example, ever notice or wonder why old tractors were often rated as X HP on the Belt Pulley but LESS THEN X HP on the drawbar ?????? Thats beacsue it took HP to turn all those big heavy gears (friction heat loss) so you has LESS HP remaining on the drawbar.
Sure, most probably know what you meant and Im sure you understand the above, but hey if we can together by discusing this help 2710 or even one other person understand something about gear reduction and friction heat loss WE DID A GOOD JOB AND OUR GOOD DEED
Thanks again and God Bless you for all you do to help and contribute on here, I hope this helps other, but if not at least were havin fun lol
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.