Posted by George Rausch on March 27, 2012 at 10:16:14 from (64.85.214.46):
Lots of various discussions about proper treatment for poles. Here's the way to figure it out, since there are about a dozen or more different chemicals (CX-A, CCA, MCA, SBX, ACQ-B, etc., etc. ) 1. Get the little end label off the pole and look and find the ESR number. For example, local lumber yard here stocks treated posts that comply with ESR-2240, which is the report, the third-party approval document that the manufacturer has performed. 2. Google or BING web search, in this case, the number "ESR-2240". 3. Scroll down a bit in ESR-2240, and you'll find Table 1; Above Ground 0.06 pcf Ground Contact - General 0.15 pcf Ground Contact - Critical Structural 0.23 pcf
Look in Table 2, and you'll see that General is for fence posts, decks, items that will be replaced avery few years. Critical Structural is for permanent building poles.
So there it is. Don't necessarily believe what the yard salesman says "Yeah it's rated Ground Contact." You WANT Critical Structural.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.