Posted by steve-in-ga on May 08, 2012 at 17:35:08 from (75.91.66.239):
In Reply to: Dodge Cummins Quit posted by Davis SC on May 08, 2012 at 17:06:05:
I have an '02 dodge with the cummins. You can pull the codes by turning the ignition switch on and off three times in a row. On the third try the codes will flash across where the odometer displays. You should be able to look up the codes and get an idea if it is the vp44. Mine went out at about 100k. I replaced both the vp44 and the fuel pump. I also installed a fuel pressure gauge to keep an eye on the pressure since that is usually what causes the vp44 to go out since it depends on adequate fuel pressure to cool/lubricate the vp44. Not too bad a job just time consuming. There use to be a real good you tube video that shows exactly how and what tools are needed to replace the vp44.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.