Posted by Jose bagge on April 28, 2013 at 13:51:30 from (75.105.0.38):
So, I started yanking out ceiling panels to follow the wire; while the guy that built the place may not have wired it logically, he hung the celing tiles high and tight and piled in the insulation batting. When I checked the commons at the panel, three were tied down by the same screw- the offender and two others. When I tugged, the ones above it got sparky so i tightened everything. The offending common, at the panel when pulled off the crew, read 120. I tracked the wire up the drywall and up parallel to a for joint and under ducting-- I could infer that it was heading towards an outlet on the other wall ( which wasn't working.) while I was in the ceiling I fould a random gfi box nailed to a loose 4" piece of 2x4 - when I pushed that button it solved a different problem I'd been having upstairs. I opened up the box and there wer three pieces of Romex wire nutter together an to the outlet, pulling them apart everything tested 0 but one black (120 to ground) and one white (120 to ground) I assumed this was power in . Assuming an open common between the outlet and panel, I pulled a piece of well wire from the common on the panel to the outlet, and got 120 between the black and the well wire. Thinking I now know the problem, I hooked the other two circuits to the well wire and black, flipped the breaker, and... Nothing. I un- nutted everything, and read zero between black/ well wire and zero from both to ground. So- I pulled a piece of Romex from the panel breaker and common and hooked it to the two circuits that didn't seem to be the feed- worked great, but I still had one outlet and two lights not working when I also hooked what I thought was the feed wires up, it power up everything. So - I'm assuming I have a bad piece of Romex between the panel and the outlet that's burnt through both the white and the black. I'm also assuming there's another junction between the outlet I,m working with and the panel, I just need to find it in the ceiling. I figure ill be pulling some wire though the walls tomorrow, for now I'm gonna put the mental gymnastics behind me and mindlessly cut some grass - freezer and poop pump powered up by extension cords. Am I on the right track?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
