The truth is....not many Americans understand the Ferguson Hydraulic system! No offence meant! (but some of the replies here prove my point!) Your lift needs set, from the information you give here.... Hang your plough on the lift and check the top link spring. It should just be able to be turned by hand. If not, then it needs shortened by screwing the end yoke inwards against the spring. Next, set the hydraulic control lever stopper about 2 1/2 inches from the top of the quadrant and slacken the 4 bolts that hold the quadrant to the lift cover. These mounting holes are slotted. With the engine running, gently tap the quadrant back or forwards until the plough sits in neutral and tighten the bolts. This setting is so sensitive that even tightening the bolts can make a difference. When you have the bolts tightened, if you move the lever downwards slightly (over the stop) the plough should drop, but pulling it back to the stop should once again hold it in neutral, likewise moving the lever upwards should raise the plough and moving back to the stop should hold the plough in neutral again. This should make a big difference to your ploughing depth. Remember different soils will have different settings on the quadrant. Heavy ground will require the stopper to be set higher than light ground. This draft system was designed to give MORE traction the deeper you plough....but everything has a happy medium! Sam
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.