Posted by Zachary Hoyt on August 28, 2013 at 10:18:41 from (50.122.163.197):
I bought an aftermarket water pump for our Massey 35 with Continental Z134 engine. It is just the impeller and fan shaft and a flat plate that bolts to the water pump housing that is still on the tractor. The pump spins freely when I put the flange in a vise, or when I hold it in my hand. When I bolt the pump on the tractor it turns, but I can hear and feel something dragging for about 1/4 of every revolution. I thought the impeller must be dragging somewhere on the housing so I filed down the surface all of the way around the edge and the face of the impeller until the machining marks were gone and it is still just the same. The other issue is that the fan shaft is running as much as .1" out of true, and I am wondering how much of a problem that will be. I do have a service manual and owners manual for the tractor but they do not seem to address the problem. I am wondering what could be causing the pump to drag internally, and I can't seem to think of anything that makes sense. Any advice will be muuch appreciated. Zach
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
