Posted by George Marsh on October 02, 2013 at 15:01:36 from (50.127.9.225):
I will never convert another honda to electric start. Honda used lock tight on the flywheel nut. Impact had to work to get it off. I have never seen lock tight on a flywheel, had I known, I would have used a little heat. Good thing they had 3 places to attach a gear puller or I would have never have removed the flywheel. The new flywheel had to be drilled and tapped so I could use a gear puller in the future. As you can see, I never thougth of removing the metal filings, which ended up on all 3 magnets. The only way to remove the starter is to pull the flywheel to get to the starter bolts.
The biggest problem was the starter. I had to drill the aluminum plate out. Then the factory hole, where the starter goes, was 4+ mm too small. Call guy where I got starter kit from and he said that I had to use a dremmel to enlarge it. That took a day.
The good news is that the engine started on the first crank. Pressure washer has sat for almost a year.
I would advise if you plan to convert over to electric, make sure the starter will fit the factory hole.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.