Posted by Texasmark1 on December 10, 2013 at 07:11:40 from (184.20.224.84):
In Reply to: Re: Battery question posted by buickanddeere on December 08, 2013 at 13:48:48:
That's what I did on my JD 4230. Mother deere put one 6v battery on the right side of the tractor and tied the - lead to the engine block on that side for ground.
Then, with a second 0 gauge wire she ran a wire from that batteries + across the tractor, under the cab, to another 6v battery adjacent to the starter and tied to the - terminal.
Then the + side to the starter solenoid. Really a nice, well engineered SCREW UP. Starting current which runs somewhere around 200 amperes, from a 12v circuit, requiring at least 10v ACROSS the starter means that you can only have 2v/200 amps or 0.01 ohm of resistance in the path with fully charged batteries.
So I have what I call a small wire (0), running completely across the tractor, plus has to go through the tractor engine and 2 bolts to get to the starter - plus the internal resistance of 2 batteries and the whole shebang can only be 0.01 ohm. No wonder my diesel was hard to start in the winter down here in Texas.
When I got tired of that I went to the OTR truck dealer and bought 2 size 31 HD 925 cca sealed batteries. While there I had 00 cables made up for my conversion.
I installed a 12v battery in each position. Then I ran 2 ea 00 wires from the + and - terminals of the right side battery to the same terminals of the left side battery. Now I have 2 batteries in parallel......rather than the internal resistance in the circuit being doubled by having 2 batteries in series, it is now halved. In addition to that I have 2 lower resistance cables interconnecting the batteries.
Then from the left battery I used 12" 00 sized jupers to connect the + to the starter solenoid, and the - to the bolt that attached the starter to the engine.
Don't need to tell you the difference. On the coldest of days It took about 15 seconds for that 404 (as I recall) cu in to light off.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
