I have a 3/4 hp pump in basement. It was wired for 240v, but I decided to return it to 120v for 2 reasons.
The main reason is I designed a circuit to detect water on basement floor. It will turn the power off to the pump. This circuit worked best on 120v. 3 months after I wired up water detection circuit, it got tested. Water softner screwed up and leaked a little water on floor.
The second reason is I have an 3500 watt RV genny with a 110v 30 amp out. When I changed over to 120v, I went to Menards and bought a 6 ft 12g extension cord. Used cord to wire pump to my water detection circuit. I can very easily plug a 12 g power cord to pump, run it to Genny. Genny will run pump with no problem. Also put 200 MFD in parallel with pump motor and PF is .99.
Personally, I don't think I use a dimes difference in electricity. Think about it, how many minutes a day does your pump run? Pennies a day.
I have a place in country too. Last year I had a new well put there with a 120v pump. Added water detection there too.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
