First: Is there still a harness connection below the oil cooler on the driver's side of the engine? If that connection is still there, cut it out and replace it with quality crimped and shrink-tubed connectors. It's a nasty job, but that harness connection is a huge pain in the a$$.
Next: check the computer power leads and relays for function and corrosion.
Next: Check the harness going to the cam position sensor. It's a royal pain but unbolt the brackets holding it on and strip off the loom. Check it over 100% for any insulation wear.
Next: check the wiring harness under those valve covers and make sure you do not have any burned connectors.
The last thing I would do is: when it starts messing up, unplug the ipr sensor (stack of quarters looking thing with wires on the end, sticking out of the hpop pointed right at the drivers seat). If it runs better, you ipr is sticking or bad.
I do not think you have a sensor problem, it sounds like they have all been changed anyway. I do not think you have a problem with the IDM, etc. to be honest, those don't go bad too often. Your main problem is, your 7.3 is a generation removed from the mechanics that are working on diesels now. I'd call the local school district bus barn and see if one of their mechanics wants a weekend cash job. That navistar engine is still running in thousands of buses in this country and those poor bus mechanics KNOW how to fix them.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.