By chance do you work with the 3 in the 5 boroughs Bay Crane, NY Crane/JF Lomma and or Cranes Inc ? I did a lot of work with NY crane 10 years ago, used to do quite a bit of work with hydraulic cranes placed on the streets, worked with an engineer to do all the filings to pull necessary permits, City of New York preferred tower cranes as they are within the perimeter or building footprint, making it a real pain to get permits, been through that many times.
I was aware that this equipment was subject to controlled inspections per DOB and or DOT, the engineer I worked with was involved in many areas with these outfits as I recall.
I remember the situation in '08 with the rigging failure on the tower crane that when they were climbing it off hours, the rigging failed and the ring fell, severing all the tiebacks, and it went over, that was seemingly negligence, nylon straps etc. 2nd one not long after that was a Favco tower crane that was recently overhauled, defective or inferior work, both NY Crane jobs, that one failed structurally, believe it was something close to or under the house. I really don't know any facts, just what was reported, I tried to keep up on industry things. I felt bad for the engineer and his company that was involved with the permit filings, he got dragged into huge mess. Theres a lot to these things, and its nothing to fool with, I've done a lot of erecting and have loaded a lot of materials into new building jobs off both tower, hydraulic and crawler cranes, what you guys do to insure they are safe is paramount, when you realize what you are working under and around.
I was a few blocks away in '99 when a crawler collapsed on 6th avenue. It was a Turner job, 30 story reinforced concrete, residential structure. It was a Manitowoc 4100 or 777, one of those or similar size, on a derrick and it was at the end of its job, superstructure was done. Hurricane Floyd if I recall correctly, had just passed, it had the tower/mast and luffing jib configuration, quite a bit of "stick" out, but was folded up and lashed down for the storm. When the operator powered it up, they had not removed the lashing, so it was still secured and he literally collapsed it onto itself, the mast and jib went over backwards, a local #608 carpenter got caught under it, apparently pushing a pedestrian out of the way, he lost his life to save another. I ran over and saw this entangled steel and knew someone was under it, what a mess, its a sound you never forget. It seems there were always accidents, DOB and DOT had their hands full with dealing with it, can't say I could agree or not, about the stringent requirements getting stricter, NY Crane had older units on the job I used lots of them, Bay and Cranes Inc always had late model units, seemed they ran almost new equipment all the time, huge expense to own that kind of equipment.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
