The only 2 reasons the light switch can get hot 1) if the Switch is internally shorted to ground 2) if the switch is broken internally and passing voltage to the light circuit, but with a poor internal path to the switch contacts. Replace the switch. (this assumes the switch was in the off position) If it was in the on position the switch is broken and not providing a clean connection to the light circuit, or the light circuit is shorted to ground, or the lights are wrong and drawing way too much.
If the system worked, and the amp meter showed charge when it was working, the reversing of the amp meter has already been done.
If the generator is a Delco "A" circuit type, (as noted) it is not polarized by touching the Field ever. Touching the field with battery voltage shorts the regulator field contacts and can weld them together, or other dammage.
If it was off of a Ford automobile or tractor It could be a "B" circuit system, and is polarized the way you did it. To find out which it is, put the part number into google with the brand and read what it is.
To correctly polarize an A circuit, the jump goes from Bat terminal to the Arm terminal.
Obtain a wiring diagram for the tractor, it will be tha same with either polarity with one exception. The Ignition coil should have the lead connected to the distributor's polarity match the battery ground. If negative ground, the Negative of the coil is connected to the distributor. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.