Posted by longmeadowfarm on June 02, 2014 at 03:13:05 from (67.252.60.236):
In Reply to: BRUSHHOG BRAND 7 FT posted by rick@marzane on June 01, 2014 at 04:29:32:
I own a Bush Hog 287 (7') that I use for rotational pasture clipping and general clearing. I use "lift" blades that I put a rather fine edge on, annually. I run the machine at rated 540 PTO speed with a ground speed of not more than 3.4MPH. My blade rotation is counterclockwise and as such, I cut left to right. The lift blades then cut against the left side wheel track/down grass.. lifting and cutting it clean. My wheel track is adjusted to be a little over 7'..outside rear tire dimensions. Running a 7' Hog with a 5' track is only asking for trouble. I adjust my "Hog" for a slight forward downward tilt..so as to allow the trash to clear better..as per the manual. And I don't run the machine on its runners..bad idea. My cut/cleared fields ..especially my clipped pastures look like I used a sickle mower. if I hit something with a blade, causing a nick/gouge that cannot be ground out satisfactorily .. I replace the blades. In my judgement, perhaps 90% of people using Bush Hog/rotary mowers..don't know what they are doing and certainly don't maintain their machines. Read the manuals..but then my John Deere Dealer told me many years ago... "no one..no one.. reads manuals".
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.