Posted by Janicholson on July 16, 2014 at 20:03:51 from (71.194.207.139):
In Reply to: engine honing posted by Nick167 on July 16, 2014 at 19:01:02:
If the 3 cylinders not replaced were not taken apart, and the new cylinder has the hone marks in it, AnD if the engine was not using oil it is OK to run it as is. Id they were taken apart, I would hone them as noted below. The valves should not spin if they are closed. If they do the engine will not run. Each cylinder should have both valves closed at its TDC compression. It is a flat head engine, and might be difficult to check the valves by pouring solvent "on" it. Look at the valves when they are open to assess their condition. deep grooves in the sealing face, or thin edges on the exhaust valves are bad. Cracks or burned grooves are also service time. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.