Well, to the wall outlet is AC, which is not polarized, so that cord will not matter. On the output side is DC which is polarized and will matter. As somone said, trace it back from the clamps, one will do, and mark one lead with tape. If its chewed through and off, use a volt meter set to DC and measure across the two leads after powering up. If the polarity is correct, one way will read positive, and if its reveresed, it will read negative so mark your clamps accordingly. Dave posted something that should be true on all or most chargers, connect it while off and see what the charger meter says. If it reads a postive voltage, you have it correct. If it tries to read negative , you have the leads reversed, so remark the colors.
Rats or mice, eh? I popped the hood on one of my Dodges that I don't drive much, and one of the little critters built itself a nest between the turbo and the valve cover. On my Allis B when the carb quit a couple of weeks ago, I noticed that one had built a nest between the gas tank and the valve cover. Apparently they climb anything...and winter must be coming.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.