I run a 7200 with a 1086. I use the PTO pump Deere offered for tractors with less than ample hydraulics. I was told by a neighbor the pump looks like the one they drove a Cyclo planter with but there might be different sized pumps out there that look the same. There is an oil cooler and filter bolted to the planter frame to go along with the pump. This pump is a little small In my opinion but does the job. I run precision Esets that require close to 20" of vac and I need to have the flow valve cranked way up to get that kind of vacuum. I have also noticed some gaps in the corn stand close to the end rows where I throttle the tractor back. The 1086 does have the bigger (16 gallon?) pump and the planter still raises a little slower than I would like to see. I had the thought of trying to run the planter with the tractor hydraulics and running the return line through the cooler but then the planter would raise even slower and the cooler might not have enough flow capacity. When we are running a 12 row over 1000 acres there isn't much time for experimentation. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.