Posted by Billy NY on January 26, 2015 at 10:44:41 from (104.228.35.235):
In Reply to: Re: Splitting Wood. posted by JerryS on January 26, 2015 at 10:28:32:
You should see if your splitter can handle a log lift or just halve them at least in the vertical position. The link below shows a log lift on common log splitter, looks reasonable to build, gives you a nice work tray/table when you don't need it, very seriously considering it for my 28 ton of the same brand.
One tool I like for larger blocks is the Lockhart log gripper from Bailey's. 30" is just a tad too large but many of the lesser diameter pieces, I can heft up and ride along my leg up onto the splitter. I don't really enjoy working bent over when its tilted up to the vertical position, so I mostly use it in the horizontal.
Worst case, I use the loader bucket on the tractor for a round of blocks to split, which I then place in gardenway carts or my old jackson wheelbarrows so I can just wheel to the stack without having to bend over and load them. I try to not work off the ground when the bigger logs are cut into blocks.
Lucky you did not get hurt, those darned larger pieces are certainly dangerous, roll, tip over, fall off etc. I've got some heavy 25" elm to deal with, soaked and now frozen, way to heavy to lift without assistance, and when on the ground I leave lots of room to work when possible, I spread things out and is why my driveway is clogged up with wood right now LOL !
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.