Posted by fixerupper on August 20, 2015 at 12:19:20 from (100.42.82.100):
In Reply to: 1951 John Deere B posted by josephmiller on August 20, 2015 at 05:45:31:
I'll ask a few questions to try to help you out. Is it in all gears? Possibly the problem is not in the transmission. It could be the clutch is dragging, putting a bind on the gears so you can't shift it easily. Is the engine idled down and running slow when you try to shift or is it running fast? Folks who didn't grow up on two cylinder Deere's tend to run the engine fast at all times because they aren't used to a slow running engine. When the engine is running fast the clutch wants to engage itself for lack of a better explanation. If you haven't already done so, pull the throttle back to an idle and then try shifting.
When it is in neutral at any engine speed does the clutch pulley want to turn on it's own without engaging the clutch? Do you have to pull back on the clutch lever fairly firmly to stop the pulley from spinning when it is in neutral? If the pulley wants to turn on it's own while the tranny is in neutral something is dragging inside the clutch and in turn putting pressure on the tranny gears making them hard to shift.
If the clutch is fine and loose and not dragging then either the gears aren't sliding well because of rust or lack of lubrication or the shift forks aren't sliding well for the same reasons. My guess is it's either in the clutch pulley or the shift forks. Let us know what you find just for our own curiosity. Jim
Oh yes, one more thing, the clutch brake could be set up too tight so it's holding the clutch lever in a slightly engaged position. When the clutch is pulled the brake pad should be a certain distance from the pulley but I don't have that measurement at hand right now.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
