Well, let's consider an automobile engine in a piece of farm equipment. For example, a K Gleaner combine had a 250 cubic inch Chev 6 engine. That engine, per the owner's manual, required an oil change every 100 hours. That same engine in a car operating under severe conditions as outlined in the owner's manual, would require an oil change every 2500 miles.In the combine, that engine would run at 2400 rpm probably 90 percent of its operating life, producing its rated 75 hp at that rpm. In a car, that engine would turn around the same rpm at 60 mph. It was rated at 145 hp (1970 vintage) at 4800 rpm which it would very seldom see. Operating at a continuous speed in the combine would extend the life of an engine. Cold starts, varying rpm's,different weather conditions seen in a car would detract from the engine's lifespan. At 100,000 miles the car engine would be due for an overhaul. We had a K that ran about 200 hours per year for 35 years, yet the engine showed no sign of oil consumption or blowby. A tractor on the other hand, would be operating at full power for more of the time than would a combine. It would be hard to fairly compare a gas tractor engine to a car engine since the tractor engine is much more heavily built. A diesel engine would usually outlast its gas counterpart in the same model of machine, but cost considerably more when new. Since tractor's operating historys' would be much more variable than an automobiles', comparisons can only be general in nature.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.