Posted by Geo-TH,In on August 05, 2016 at 07:27:47 from (172.78.109.69):
I took M w J advice, only used 2 wraps of blue Teflon. It's thicker and stronger than white Teflon. The O ring that comes in contact with cylinder wasn't a snug fit on the end piece. The Teflon snugged things up, hoping enough.
Many times on YT you get conflicting advice, and you have to decide what to do. Someone recommend using Devcon liquid steel epoxy. Hyd shop and others advices against it. Trying to sand it I was beginning to regret the decision. Once I got it sanded, the only epoxy left fill in the damaged area that is between the wire retainer and the outer O ring. I'm convinced that area was damaged when I took the cylinder to they hyd shop because I wasn't able to get the retaining wire out. If you look at cylinder you will see a grove where the retaining wire goes. Also a grove on the end piece. No clips, just wire retainer.
The epoxy filled in and smoothed out the area that damaged the O-rings on piston.
I use old shop rag, zip ties, electrical tape and installed 2 old wiper o rings on rod in an attempt to keep dirt away from the end of the cylinder that is prone to leaking. also keeps the dirt out of where the wire retainer goes. It my redneck leak detector too. Wet rag means I have a leak.
All back together, no leaks. But I'm convinced if your hydraulics isn't leaking today, just wait there's always tomorrow.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.