A continuity tester is similar to a penlight flashlight, in that it has a battery(s), a lead wire with clip and a metal point. When the clip from the lead wire is touched to the metal point the light will light, indicating continuity. To use with your harness, you will clip the lead wire to a wire at one end of the harness and then probe the wires at the other end. When the light, lights you have identified the other end of the wire - it has continuity. For example: if you want a brown/green wire to go from the switch to the thermostart, clip on to the switch end of the wire and probe all the wires at the other end of the harness. You are looking for the light to light for the thermostart connection(s) and no other wires should show continuity. In this manner you simply work from the 240 wiring diagram making one connection at a time.
There is a similar tester called a "test light". It has a lead wire/clip, metal point and contains a bulb - it has no battery. To use, the lead wire is typically connected to a ground source and the light will light when the point is touched to a source of 12 volts.
Both testers are available at NAPA or other parts stores and can be had for $10 +/- each.
It would be helpful if you post the 240 wiring diagram you are working with.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
