I think that solid bar 48" long is the wrong piece of iron for an axle. Quality axle manufacturers use a hollow tube to reduce weight and yet have plenty of strength. Even with the tube less than .250 wall thickness, the stub will bend before the tube bends. A friend borrowed my tandem axle trailer and proved the stubs will bend before the tube bends (if the spring pads are close to the brake flanges). Purchase some appropriate ID tubing for the axle stubs you already have, set up a careful alignment jig and weld the stubs in place. That is how most (maybe all?) commercial axles are built. The axle is then bent with a rise in the center to give the wheels and tires a bit of camber.
If you are cheap and lucky, you might find a trailer home or RV axle that you can cut the tube section from. Because of the camber already bent into it, mark the center of the tube and then cut 24" to either side of center. You may get lucky enough to avoid any lathe or mill work. I did get that lucky with some used axle tubes, so careful welding was all that was needed for 6000# capacity axles.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.