Posted by MikeJM on May 01, 2017 at 10:22:29 from (70.192.76.212):
In Reply to: disk size posted by jim5350 on April 30, 2017 at 19:45:15:
On paper a 3020 might seem like it's a match for the 80, but out in the field it is not going to hang with an 80.
Your soil type, amount of rocks, plowed/not plowed will matter a lot. As well as how well ballasted it is and how heavy the disk is. We have an 820 at 11,000 lbs that we used to work pulling 5-16's, I would expect it to handle an average 12 ft disk in almost any conditions.
Just for a comparison our 630 will pull a 12 foot John Deere AW disk in plowed ground, it works for it, but the 10 ft one works better. I know our 820 struggles with our just over 12 ft wide 1640 plowing disk in un-plowed ground, forget plowed ground, takes a 15,000 lb 4440 to handle it in loose soil.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.