So much missing information! Does your 1450 have hyd. lift or manual lift lever? Check for broken spirol roll pins on anything attached to the 3/4" diameter round steel bar that is the rockshaft.
Have you successfully installed and operated the snow blower on this Cub Cadet before? Or is this the first time you have tried to install a snow blower on this tractor? Fact your front tires were flat doesn't sound promising. If the tractor wearing this snow blower is a new pairing of the two machines, the lift bar from the tractor rockshaft to the snow blower may be too long. Most guys on IHCubCadet.com make adjustable lift rods so they can adjust lift height. Making a new lift rod is not hard. Put 2x4's under both frt tires, with lift lever lowered completely and snow blower setting on floor, measure center to center distance from lift lever hole to snow blower lift lever hole. I used a piece of 1" or 1-1/4" x 1/8" galvanized steel flat stock on my CC 35 years ago. Cut to length, drill two 1/2" holes, DONE!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.