Bruce can you set the height of the baler any higher??? On JD balers you can change the axle mounts to raise or lower the baler. I set mine so the baler is as high as it can go. The allows the pickup to have more travel up. Yes in some cases the pickup may not pivot all the way down to get some hay crossing a ditch or some thing like that. Also there are float springs on the header. I keep them set to where the pickup has very little weight on it. See if you can do any of this on your baler. It will help you if you can.
To the Deere guys saying that the "book" says to set it differently, as in lower, Setting the baler higher opens the throat up so you can bale bigger windrows easier. This is really true in shredded corn stalks. Been doing this for close to 25 years now and it does not hurt the baler any and actually saved the pickup from damage sometimes.
Bruce be glad it is only a few bent. One of my custom baling customers raked the windrow over a small stump. MY Grand Daughter could not see it at all under the hay. We had to replace the majority of the stripper bands, the rake cross bars and do lots of straightening on the pickup frame.
Making hay can be fun at times.
You need to move that lake you swim in further south for us other YTers to share. LOL We are going to be HOT and HUMID for the next few days.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.