Posted by ericlb on December 20, 2018 at 14:29:52 from (98.20.41.116):
i posted on the n forum before but im hoping for some others to see this, the problem is the stabilizer arm on the left side is broke, i traded for this mower, which i had personally seen run, though it was a decade or more ago, the man opted for a brush hog when he changed his farming operation, and this mower has sat in a barn since then. now i got the thing where i can get at it, and discovered its not the first time it got broke, the stabilizer arm has several welds, on it, the 501 is model 14-92,the mower itself is in good shape and operates as it should, need to install a new wood pitman arm and belt just for maintenance, but i discovered these stabilizer arms are hard to find,everything else wear part wise is commonly bought, mine have the flat ends where it goes into the clamp box, and a bolt goes thru them, the left one is where the rod from the bellcrank and spring on the bottom also bolt on, im going to try a temporary weld, but due to the break, i have no confidence that it will ever hold in that location, does anybody have a used one? i can fix the right side i think, but the left is in 2 pieces, and a old break
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.