Tractor Talk Discussion Board |
Re: Torquing Head Bolts - do I add anti-seize ????
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by G Taylor on August 31, 2001 at 09:01:53 from (129.37.170.62):
In Reply to: Torquing Head Bolts - do I add anti-seize ???? posted by Alberta Mike on August 29, 2001 at 07:35:06:
Another Doug raised a vital point of running a bottoming tap down the threads. An important step often missed but one of the basics always done by pro automotive engine builders. A light application of cam assembly lube rather than engine oil will provide more even torque readings. It has a high "point pressure" and stays between metal surfaces when ordinary lube oil squeezes out. The use of hardened steel washers under the nuts or bolt heads will reduce galling & improve torque consistency. Sometimes after many years of stress,heat/cooling cycles & corrosion new studs/nuts or head bolts are cheap insurance. A bolt or stud is just a "straight spring" holding the castings together.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|