A single bottom will be easier to learn the adjustmends on than a 2 bottom as the leveling adjust ment will not be as critical. Also a plow that the tail wheel carries the back end instead of a plow that carries the tail wheel will also be easeier to adjust as one less adjustment to have to learn. Dad and I both had plowed for years and used plows that carried the tail wheel, got a different plow and used same hitch setting as always but could never get it so that tail wheel was not skiping over the ground. One day hooked to plow but drawbar was in a different setting for a previous job and no longer any tail wheel skiping, was runnimg all the time as supposed to do. So even tho we were both experanced it was something we just could not see to get the adjustment correct. Now a plow that rides on tail wheel all the time that is also one less adjustment for you to learn right off. And on level ground you should have a 66" wheel tread, center of left wheel to center of right wheel. Hilly ground go for 72" instead of the 66". Some will say set the tires at 56-60" but that gets into danderous area with that tall a tractor do to tip angle. Even if so level no danger of rolling tractor the seating angle WILL hurt your back later in life and a sore back is nothing to laff about. Your back will like you if you do that. At your age you will not think about that but get twice your age it will start showing up by hurting from setting at an angle. One wheel in furrow with the other on top of the land. And stay away from an Oliver plow. They are a good plow but for them you should to be able to adjust the hitch have a tractor with a 56" wheel tread like the W4 that is just a standard tread version of your tractor. I had the oliver plow but tried using it with the 72" wheel tread and could not get it adjusted to work correctly, Would have worked OK with a tractor with the 56" wheel tread. Hitch design. Traded it after one season on a Deere and had that plow for 30 years. Try to find a field to practice plowing on for several hours before you are ready to head to that plow day as it will take you hours to learn operation of outfit and how to set things up so the other plowers do not have to do it for you. Have seen that many a time and moldboards not clean and shiny but very rusty and soil will not slide over that rusty moldboard but just stick to it. Major embeaancement., you don't want to look like you are a dummy the moment you get to that plow day. And even if you are close enough to that plow day to drive tractor to plan on having a trailer to haul the plow as even if on rubber they do not like to be pulled on the road. In that case the plow that carries the tail wheel will be easier to load-unload than one that rides on the tail wheel. I started plowing at age 13 and 62 years ago. Use one Farmall, 5 Fords, 1 Ferguson, 1 Moline and 5 different Deeres. And both clitch lift and hydroliv lift, plows that carried the tail wheel as ones that road on it, semi mounted and 3 point hitch models. A lot for you to think about before you ever start looking for that plow. And some 3 bottom can be converted to a 2 bottom just by unbolting and rebolting in a different place. Some 2 bottom could also have that done as well to make a 1 bottom but most not.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
