Posted by 2wheelgnnr on June 06, 2019 at 08:37:01 from (104.229.212.4):
I ve got an issue I want to run by you guys. I have a Jubilee and had many problems in the past with sediment clogging fuel line. (yes I know Im going all the way to the beginning but... never know info may help) I emptied tank and took off and got the sediment and rust out of the tank and reinstalled. at the time they had some aftermarket pepcock on the unit.... I installed it with a proper sediment bowl.
Now even after rebuilding the carb im finding as the tractor sits the carb bowl must leak out to emplty so when I want to use tractor I have to open up the fuel line and fill the carb bowl first so to speak. I notice this takes long time!! I realized the other day that the sediment bowl has 3 ports on it. the Line out to carb and the turn dial switch and a closed off hole with a cap screw installed on it. I opened that to see if it was clogged and if gas was flowing and by opening that I let air in so the gas would flow better. Since then I find that if I keep this not 100% tight to let air in / out of the system gas flows better.
I ordered a fuel line check valve to install to let air in but not gas to leak out of that third "port". is this usual. I had a 8n before this and didnt have an issue with gas flowing properly and sediment bowl was not "messed with" at all to allow gas to flow better. What am I not getting???/ or doing wrong. the other set up did need "air" inlet to allow to gas to flow??
Thank you for any input. I hope I explained this properly.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
