Posted by Leroy on April 16, 2020 at 09:36:55 from (96.45.243.241):
In Reply to: Hay cutting pattern posted by Grandpa love on April 16, 2020 at 06:03:35:
Only seems like the younger ones like just cutting back and forth. I started mowing with a horse drawn mower pulled by a tractor. Only way that could be done was around and around. First piece of machineery I bought was a horse drawn mower in 1959. With those you would have to mow back and forth stop at each end raise cutter bar put out of gear turn and put bar back down and put in gear and how long would that take getting off unit twice for a pass with mower. And those mowers you had to raise bar slightlt to go over the cut hay to mow out the corners that the bar in front of wheels would not do. When the mower came out with wheels in back of bar eliminated that and semi-mount never had that strip left from turning. That is ifyou could make a square corner, turn wheel and hit brake and turn was made. Mow back cut first as that gives you correct starting point for going clockwise. Should be able tosee any obsticales laying in hay to go around them. If you try just going back and forth you have to wait to cut field untill those outside rounds are baled so you are not traveling on them all the time just trampling the hay into ground. And you will never make up lost time traveling empty across ends. The only time back and forth cutting makes any sence is with a self propelled outfit or a hydra-swing that you stay on same side for every cut and then you still have to wait for the outside rounds to get baled. If you have time for waiting from first cutting to baleing before cutting rest of field then might make sence but who has the time to do that. And either your bar mower or your mower-conditioner will make those perfectly square corners you do not have to cut out after rest of field is mowed. This works just as good on any shape field. Only split a field if it is large enough that you want tobale as seperate fields because you could not do it in one day.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
